Jump to content
Corsair Community

CMP12GX3M3A1600C9 error


Sepe

Recommended Posts

Tengo una memoria CMP12GX3M3A1600C9 2X de 24GB, una placa P&X58D Premium bios X.M.P. automàtica QPI/DRAM Core Voltage 1.20v. Me parece que puedo aumentarla potencia ¿A cuántos voltios? A veces me aparece la pantalla azul, no se si es a causa de la memoria o del QPI/DRAM Core Voltage. ¿Es mejor que el VCLK Frequency 3.200 esté en automático o manual?

-------------------------------------------------------

I've got a 24GB x2 CMP12GX3M3A1600C9 drive and a board P6X58D Premium bios X.M.P. automatic QPI/DRAM Core Voltage 1.20v. I tihnk I can increase votlage but how much? Sometimes my screen turns on blue, and I don't know if it's because the memory or because QPI/DRAM Core Voltage. CLK Frequency 3.200 is better to be automatic or manual?

Link to comment
Share on other sites

  • Corsair Employees

All you should have to do in go to BIOS setup and load setup defaults and then enable XMP profile one it will set everything for you including the Voltage.

But if you have two sets of mixed modules I would suggest setting the memory frequency to DDR1333 manually after you enable XMP.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...