Jump to content
Corsair Community

H60 Pump Speed?


Ken429

Recommended Posts

Just installed the H60 in a Asus P8Z68-V Pro/2600K system. The Asus board has fan control and I am trying to figure out if it is telling me the correct H60 Pump speeds. I have the H60 Pump connected to the Cha_Fan1 connector. I can make it read anywhere from 1780 RPM to 3500+ RPM depending on the settings. I know the pump should run full out but I can't find that RPM anywhere in the documentation. I have been running it at 1780 RPM (Board Default) and the CPU stays pretty cool but....I know it should be running faster?
Link to comment
Share on other sites

Thanks for the information. I wanted to use Fan Control on the MB to slow down a couple of fans so I hooked the pump up to the Power fan connector which by Asus default (lack of any other info) it must provide full power. It does, the H60 Pump RPM now shows 4250 or there abouts. Thanks again for the quick response.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...