Grogers717 Posted June 12, 2011 Share Posted June 12, 2011 How do you secure the HDD drive cage to the location on the bottom near the PSU? I don't notice any screw holes that I can use to secure it with. Thanks for any help! G Link to comment Share on other sites More sharing options...
grandvitesse Posted June 16, 2011 Share Posted June 16, 2011 I have a 650D, but I believe the other cases use the same method. At the bottom of the case are two slots that the HDD drive cage will slide into. On the left side of the left slot are two place to insert Phillips head screws that will line up with the two holes on the bottom left-side of the HDD drive cage. It is easier to mount the HDD drive cage when the PSU is not installed, but if you have pliable fingers and a shorty Phillips screwdriver, you will be able to fasten the cage in place. Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted June 22, 2011 Corsair Employee Share Posted June 22, 2011 There should be rails that you use to attach the HDD in place, no screws are required. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.