Jump to content
Corsair Community

CMT4GX3M2B2133C9 In MSI 890FXA-GD70


purkle

Recommended Posts

Hello..

long time listener, first time caller..

 

I've been a lifelong Corsair buyer

I love Corsair and will continue to buy them, also have had to RMA stuff and I've always had a favorable outcome.

 

With that said here is my current set up;

 

MSI 890FXA-GD70

AMD Phenom II X6 1100T Black Edition Thuban 3.3GHz with custom Zalman cooling

CORSAIR DOMINATOR GT 4GB DDR3 2133 [CMT4GX3M2B2133C9]

ATI Radeon 6850 with custom Zalman cooling

Zalman 850W PSU

######## Twelve Hundred case.

 

 

The trouble i am having is i cannot get this memory to reach anywhere above stock speeds

I'm not to smart when it comes to memory settings.

I have done a ton of reading on Corsair's website and MSI's also googled about this problem.

I've set the manual timing to 9-10-9-27, Dram Volt to 1.65 but i still cannot reach it.

 

Little help?

Link to comment
Share on other sites

  • Corsair Employees
You will be limited by the CPU and I am sorry I cannot tell you how to over clock. But I would try and set the memory Voltage to 1.7 Volts and increase the CPU/NB Voltage +.2Volts and set the memory frequency at DDR1333 and 2T Command Rate and then see what you can get with your CPU.
Link to comment
Share on other sites

You will be limited by the CPU and I am sorry I cannot tell you how to over clock. But I would try and set the memory Voltage to 1.7 Volts and increase the CPU/NB Voltage +.2Volts and set the memory frequency at DDR1333 and 2T Command Rate and then see what you can get with your CPU.

 

 

 

Thanks Ram guy!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...