crackersb Posted January 8, 2011 Share Posted January 8, 2011 Hi When i plug my flash voyager 32 windows 7 says to me that it's ready to use BUT no letter are assigned with the flash voyager and i can't access to it Help please Link to comment Share on other sites More sharing options...
Synthohol Posted January 8, 2011 Share Posted January 8, 2011 go into disk management and assign one:) Link to comment Share on other sites More sharing options...
crackersb Posted January 8, 2011 Author Share Posted January 8, 2011 that's it you can see the drive N3 but no media on it i can't format it : the system says that there is no media in the specified device when i try Link to comment Share on other sites More sharing options...
Synthohol Posted January 8, 2011 Share Posted January 8, 2011 try device manager and uninstall it then scan for new hardware and let it find it again and load the drivers. you may also check the BIOS to see if USB 2.0 is activated. good luck. if that all does not help then i suggest returning it or try it in a different PC. Link to comment Share on other sites More sharing options...
crackersb Posted January 9, 2011 Author Share Posted January 9, 2011 it doesn't work on any pc i've tried whre can i return the Flash voyager ? Thanks Link to comment Share on other sites More sharing options...
Wired Posted January 9, 2011 Share Posted January 9, 2011 You return items to the store within their return policy. You RMA your items to Corsair to have them replaced under warranty. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.