nej_simon Posted January 6, 2011 Share Posted January 6, 2011 Hello Since I installed my Corsair F120 I've been getting this bluescreen sometims when resuming from sleep. I've updated the drive to 2.0 (I did this right after installing the drive so I'm not sure the problem existed with 1.1) and tried with both Intel RST and Microsoft's driver. Windows 7 32 and 64 bit has the same problem. The computer is a Samsung NF310 laptop with an Intel ICH7R/DH SATA controller, AHCI is enabled. Any ideas? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 11, 2011 Corsair Employees Share Posted January 11, 2011 Please try the latest firmware posted at the top of this section and update to the latest version Corsair Force Series Firmware 2.0 Update If that does not solve the problem am sorry but you will most likely need to wait for an update from the Notebook manufacturer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.