John305 Posted December 30, 2010 Share Posted December 30, 2010 Hi I had bought a 8 gig kits and it had one bad module so i advance rma the kit. Just got the new ram put it in no video signal I tried each module one at a time and still no video signal. The other ram I have is the same model and its running the 6 gig still fine. Is there a way to get the pc to see the ram as I cant see all 4 sticks being bad.Sry its CMX8GX3M4A1600c9. Hi all also all the 8 gig kit im still useing 6 gig of is ver 5.2 where as the stuff I cant get to work the new rma is ver 2.3. All other numbers are the same. Thank You Link to comment Share on other sites More sharing options...
Wired Posted December 31, 2010 Share Posted December 31, 2010 So the memory tests fine in another system? Does other memory test ok in this rig? Link to comment Share on other sites More sharing options...
John305 Posted December 31, 2010 Author Share Posted December 31, 2010 Hi I only have one ddr3 system here at home. The first memory i got the 6 gig im useing of it tests fine with new memtest no errors. if i put in the other 2 gig module and run memtest I get errors from that module. I have tested each module on its own with only it installed and its only that one module that gives errors system runs great. With the new advanced rma ram no boot system trys to start all fans spin hd flashes for a few min then it just sits with no monitor signal. I have tried each of the rma modules on its own and still the same thing fans but no boot or video signal. The system will still run the ddr2 8 gig with no errors also. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.