KrashKorse Posted December 17, 2010 Share Posted December 17, 2010 Just built an new system based on I7-950 /w EVGA X58 MB. Using the H50 to cool the CPU and I have temps at 20 idle (which I think is great!). My only concern now is I hear water running through the system from time to time. It almost sounds like a leak, but everything looks dry in the case and I dont see any wetness around the seals. Is that "liquid" noise I hear normal? I was also a bit concerend about the 2 posts of real leaks, though I dont think this is common. Thanks, Krash Link to comment Share on other sites More sharing options...
Synthohol Posted December 17, 2010 Share Posted December 17, 2010 are you able to mount the rad with the hoses at the bottom? this way the small amount of air in the system will trap itself at the top of the rad where it wont do any harm or likely move through the system again to make the noise. Link to comment Share on other sites More sharing options...
KrashKorse Posted December 17, 2010 Author Share Posted December 17, 2010 No, mounted with hoses at the top. It was hard to fit the rad in the SliverStone TJ10B case. I have not heard anything in a while, I just want to make sure some "liquid" noise everyone now and again is normal. Link to comment Share on other sites More sharing options...
Synthohol Posted December 17, 2010 Share Posted December 17, 2010 ok, prolly just air bubbles circulating. hoses down is a fix though.:) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.