feanix02 Posted December 7, 2010 Share Posted December 7, 2010 Hello, After running CrystalMark 3.0 it lookes like the 4K read/writes are quite low, do these figures look normal? http://i866.photobucket.com/albums/ab224/HKp30/CorsairP128.png http://i866.photobucket.com/albums/ab224/HKp30/Corsairp128specs.png Link to comment Share on other sites More sharing options...
Wired Posted December 7, 2010 Share Posted December 7, 2010 Test with ATTO, not CrystalDiskMark. Link to comment Share on other sites More sharing options...
feanix02 Posted December 7, 2010 Author Share Posted December 7, 2010 Test with ATTO, not CrystalDiskMark. Thanks for the info, See ATTO results below http://i866.photobucket.com/albums/ab224/HKp30/CorsairP128ATTO.png Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 7, 2010 Corsair Employees Share Posted December 7, 2010 I have posted this previous on how to restore the drives performance. You might give this a try and see if it help the performance. I would suggest using Accronis to make an image of the drive (if you are using Windows) then use Parted magic to Wipe the drive under tools select Erase Disk and Secure Erase and then, install the drive on the system you will be using it as a second HDD and format it with the QUICK Option Only and 4k Allocation then test it with Atto again to be sure its running properly then delete the partition and image the drive back to its original image and you are done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.