Erikstar Posted November 25, 2010 Share Posted November 25, 2010 Hello! I have a Corsair F60 SSD, on which Firmware 1.1 was installed when I bought it. Today, I made an update to Version 2 and now I get bluescreens, which I hadn´t with Version 1.1. Is there a possibilit to downgrade to Version 1.1? Thanks! Link to comment Share on other sites More sharing options...
Synthohol Posted November 25, 2010 Share Posted November 25, 2010 try upgrading the bios on the board you havent listed in your specs. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 2, 2010 Corsair Employees Share Posted December 2, 2010 And I am sorry but there is no way to go back to a previous firmware, but Firmware 1.1a is still posted you are welcome to try it but I suspect it will not see the drive. Link to comment Share on other sites More sharing options...
Synbios Posted December 2, 2010 Share Posted December 2, 2010 If you're having trouble with Force drive after the 2.0 update post here if you haven't already in a single, concise post with all your system specs and describing your problem: http://forum.corsair.com/forums/showthread.php?t=91116 Thanks. Link to comment Share on other sites More sharing options...
kpdillon Posted January 11, 2011 Share Posted January 11, 2011 And I am sorry but there is no way to go back to a previous firmware, but Firmware 1.1a is still posted you are welcome to try it but I suspect it will not see the drive. I just downgraded from 2.0 to 1.1a in Windows 7 64bit. My BSOD's might actually be resolved. Keeping my fingers crossed. The way I downgraded it was by running the tool in Windows XP SP3 compatability mode and running as administrator. I hope this helps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.