Jump to content
Corsair Community

Failing Memtest86+ Test5


Recommended Posts

When I first installed the system, it kept giving BSODs and crashing all the time.

I went into BIOS and changed the DRAM frequency to 1600MHz from auto (auto was targetting 1333MHz). DRAM voltage was at 1.65V...left it that way.


The system then became stable (so far haven't experienced another crash).


However, it is failing Prime95 after test 2 or 3.


It also fails Memtest86+ test no. 5.


Any tips?



Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...