maklabouhlel Posted November 12, 2010 Share Posted November 12, 2010 Does the usb3 have to connect externally? Is there no internal usb3 connector? Are we still catering for AC97 and adding clutter? Link to comment Share on other sites More sharing options...
sh1ft Posted November 12, 2010 Share Posted November 12, 2010 There was no finalized spec for a USB 3.0 header when the case was made. Yes, you must run it externally. Link to comment Share on other sites More sharing options...
Cannyone Posted November 21, 2010 Share Posted November 21, 2010 Yep! there are no mboards with USB3.0 connectors. And I always use the HD Audio connectors for the front panel. I suppose if you were careful you could trim that AC97 connector off and tape the loose wires down so they would not contact each other... I just used some electrical tape and some spiral-wrap to tie that stub down and left it that way. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.