ibxxx Posted November 10, 2010 Share Posted November 10, 2010 What settings should i use to get the most from the memory, i dont really want to overclock my cpu, i have played about with bios settings on older pc's but the bios on this board is complicated. What is the voltage for the memory, QPI/DRAM or DRAM Bus voltage ? And what should they be? For the settings 8,8,8,24 2T what values do i change ? Also what is the 1st information, 2nd information and 3rd information for?? Thanks in advance Link to comment Share on other sites More sharing options...
Wired Posted November 10, 2010 Share Posted November 10, 2010 All you should have to do is enable XMP and it'll do the rest for you. Link to comment Share on other sites More sharing options...
ibxxx Posted November 10, 2010 Author Share Posted November 10, 2010 soory to be a thickie but how do you do that Link to comment Share on other sites More sharing options...
Wired Posted November 10, 2010 Share Posted November 10, 2010 Look for a memory setting near the top that says something like AI Overcock Tuner. Should have XMP as one of the options. Link to comment Share on other sites More sharing options...
ibxxx Posted November 10, 2010 Author Share Posted November 10, 2010 found it , thanks mate!! Link to comment Share on other sites More sharing options...
ibxxx Posted November 11, 2010 Author Share Posted November 11, 2010 would putting the QPI/DRAM to 1.4 damage the cpu ? Link to comment Share on other sites More sharing options...
trackrat Posted November 11, 2010 Share Posted November 11, 2010 1.35 V seems to be the safe recommended max QPI voltage? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.