johro Posted November 5, 2010 Share Posted November 5, 2010 Hi, using 2 sticks of 2gb TW3X4G1333C9A (ver 2.2) with Biostar TA890GXB HD and AMD X3 445 (no overclocking). BSOD ( BAD_POOL_HEADER) on boot when machine has sat for several hours. I boot into safe mode a couple of times and then reboot and all is ok. If I power down and then restart after warm, no problem. This is a new build and I have performed clean install of Win 7 two times with same problem. Have run Memtest86+ with differing results, most of the time all is ok, a couple of times errors found. I have confirmed that voltage is set to 1.5. MB originally defaulted voltage to 1.6. I could please use some help on trouble shooting...do I need to run Memtest when machine is cold? Is this RAM compatible with MB? Thank you Link to comment Share on other sites More sharing options...
trackrat Posted November 6, 2010 Share Posted November 6, 2010 Memtest one DIMM at a time. 1.5 V is the default but 1.6 V. should not cause issues. The TW3X4G1333C9A is approved for AMD Phenom II platforms so it should work fine. Make sure that you have the latest BIOS. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.