Max_Power5000v Posted November 2, 2010 Share Posted November 2, 2010 Hey forum, originally had built my system with a TWIN2-4096C5D kit, it started crapping out on me, so i got a 2048C5D kit for the meantime while the 4096 kit was being RMA'd. When I got the 2048 kit one stick was bad so I RMA'd that one too. Now my question is can I run both kits together at 1066MHz, can i tweak the CPU-NB or Memclk or any other settings to run both a max speed, or will I have to bring the whole controller down to 800? Also will they still run in Ganged (Dual Channel) mode, or will it automatically single channel it? Link to comment Share on other sites More sharing options...
Wired Posted November 3, 2010 Share Posted November 3, 2010 No guarantees when mixing ICs / ICs of different densities / maxing out the slots. May have to drop the speed down a notch or 2. Link to comment Share on other sites More sharing options...
.thumb.gif.9f5e3c6b5e95474596c3b7d24bfbb3e0.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.