Dx3 Posted October 31, 2010 Share Posted October 31, 2010 hello, actually from what i can read in CPU-Z i run my RAM at: DRAM frequency 800Mhz FSB:DRAM 1:2 9-9-9-24-110-2T voltage (in BIOS) is set to Auto at 1.50V now my questions : if i put a higher V (lets say 1.60V) would i have a performance increas or can that damage the RAM ? what should i do to get to 7-7-7-20-48-2T and is it even possible ? thanx in advance for your help Link to comment Share on other sites More sharing options...
Wired Posted October 31, 2010 Share Posted October 31, 2010 Are you looking at the MEMORY tab or the SPD tab? The MEMORY tab's the right tab to see your actual speeds. Link to comment Share on other sites More sharing options...
Dx3 Posted October 31, 2010 Author Share Posted October 31, 2010 im looking at the memory tab ;) Link to comment Share on other sites More sharing options...
Wired Posted October 31, 2010 Share Posted October 31, 2010 Should just have to enable XMP. Link to comment Share on other sites More sharing options...
Dx3 Posted October 31, 2010 Author Share Posted October 31, 2010 if i enable XMP i dont get the desired timings :S Link to comment Share on other sites More sharing options...
Dx3 Posted October 31, 2010 Author Share Posted October 31, 2010 else what about my other questions from the first post about the voltage plz ? Link to comment Share on other sites More sharing options...
Wired Posted October 31, 2010 Share Posted October 31, 2010 They're rated to 1.8v I think, so trying 1.6 or 1.7 won't damage anything. Link to comment Share on other sites More sharing options...
Dx3 Posted November 1, 2010 Author Share Posted November 1, 2010 ok thnx, but will it gain in performance if i raise the voltage or will it just make them get more hot ? also can i hope get may timmings tighter when i raise the voltage ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.