voltaire2030 Posted October 28, 2010 Share Posted October 28, 2010 My board is a mini-itx Gigabyte HB55N with no raid controller. I installed WIN7 64x with no problems but it's showing only 1 drive on my 2 SSD Force series ? BIOS set to AHCI Link to comment Share on other sites More sharing options...
Synbios Posted October 28, 2010 Share Posted October 28, 2010 Go to disk management under computer management and see if it's appeared there, it's probably detected but unallocated..the drive has to be formatted first before it will appear in My Computer. On a side note, is the drive being detected in the BIOS? Link to comment Share on other sites More sharing options...
voltaire2030 Posted October 28, 2010 Author Share Posted October 28, 2010 Go to disk management under computer management and see if it's appeared there, it's probably detected but unallocated..the drive has to be formatted first before it will appear in My Computer. On a side note, is the drive being detected in the BIOS? Drive is detected in the bios .. Will reformat both .. Link to comment Share on other sites More sharing options...
Synbios Posted October 28, 2010 Share Posted October 28, 2010 Drive is detected in the bios .. Will reformat both .. You don't have to reformat both! You can format the drive in disk management. If the drive is detected in the BIOS then most likely it will appear there as well, probably as "unallocated"! No need to format over your win7 installation...you're just making more work for yourself. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.