Jump to content
Corsair Community

CMT6GX3M3A1600C7 Fan speed problem


Tuga

Recommended Posts

Hello everyone

 

I got problem my GT memory fans are connected to SYS FAN1 and in bios (PC Health Tab) it shows that my fans are working on ~4.2k rpm speed.

 

Is that normal or not? Should I open support ticket?

 

My mobo is : GA-X58A-UD5 (rev. 2.0)

 

Can those fans make any noise and is it possible to control them?

Link to comment
Share on other sites

I guess that is normal, my fans run at a very high speed if not controlled (also 4000+rpm). They do make a (slight) noise when running at full speed, but remember, slight noise for me is debatable, as I have 13 fans + 3 pumps running in my machine ;). you can run them via a fan-controller. have a look if you can set your motherboard to control the speed of the fans, then you don't need an extra fan-controller, or resistor-mod. btw. I have found that my RAM temps are cool enough even when the fans run below 1000 RPM.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...