jaunomus Posted October 23, 2010 Share Posted October 23, 2010 Hai, I just bought a brand new comp, and I seem to have a little problem. When I set my RAM Frequency as "Auto" or "1333" (as it should be) in BIOS and start comp, my MoBos RAM light lights up and monitor says "No Signal" (and I don't get the beep). Fans start fine. As 800 / 1066 it works just fine. Asus' MemOK sets it to 800, and clocks to 8-8-8-20 considered as "safe settings". Link to comment Share on other sites More sharing options...
jaunomus Posted October 23, 2010 Author Share Posted October 23, 2010 And CPU-Z gives VS2GB1333D4 as my part number :/ Link to comment Share on other sites More sharing options...
trackrat Posted October 23, 2010 Share Posted October 23, 2010 You can try manual BIOS settings of 9-9-9-24 2T @ 1333 MHz. @ 1.5V. http://www.newegg.com/Product/Product.aspx?Item=N82E16820145278 Link to comment Share on other sites More sharing options...
jaunomus Posted October 23, 2010 Author Share Posted October 23, 2010 Nope, result; fans spinning and beard growing as described in 1st post. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 26, 2010 Corsair Employees Share Posted October 26, 2010 Try testing each module one at a time and see if one module is causing the system not to post at 1333MHz. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.