too Posted October 19, 2010 Share Posted October 19, 2010 I have 4x2 sticks of Corsair Dominator DDR2 1066Mhz on a MOBO Asus P5Q. The mobo supports memory with 1200Mhz on DDR2. The problem is that I can´t get the memories run less them 5-6-6-18-3-52-6-3 on 1066Mhz. If I change any of those the system won´t post. The best I could get was these timings with manual settings on: CPU PLL Voltage: 1.52 FSB Termination Voltage: 1.24 DRAM Voltage: 2.10 NB Voltage: 1.12 SB Voltage: 1.10 Yes I´m a noob in O.C. I´ve been reading a lot but I still don´t know what should I do to get them running faster and stable. I would like lower latencies or higher frequencies, I´m afraid to burn the sticks though, since I can´t measure the temps of them. How far can I go with all this ram on my mobo and how can I do it? Thanks!!!! Link to comment Share on other sites More sharing options...
This topic is now archived and is closed to further replies.