shadow6491 Posted October 18, 2010 Share Posted October 18, 2010 The Corsair product information says that every stick of memory is tested at 2000 Mhz however the test parameters only show it set at 1866. Could you please explain this? Testing parameters for The TR3X3G2000C7GTF: TR3X3G2000C7GTF Data Sheet Testing parameters for The TR3X6G2000C7GTF: TR3X6G2000C7GTF Data Sheet Motherboard make and model: ASUS P6T Premium/Deluxe ! Each set is tested and packaged together using the following settings: Advanced Jumper Free CPU Ratio Control:Depends on CPU FSB Frequency: AUTO PCIE Frequency: 100 DRAM Frequency: DDR3-1866 MHz DRAM Timings Control: Manual CAS# Latency:___________7 RAS# to CAS# Delay:______8 RAS# Precharge:__________7 RAS# Activate to Precharge:20 DRAM Voltage:_________1.65V QPI Voltage:___________1.60 V XMP1.2 settings All settings not listed should be left at AUTO or BIOS Default Maximum DDR3 recommended VDIMM: 2.00 Volts Link to comment Share on other sites More sharing options...
Wired Posted October 18, 2010 Share Posted October 18, 2010 That memory hasn't been made in well over a year. Link to comment Share on other sites More sharing options...
shadow6491 Posted October 18, 2010 Author Share Posted October 18, 2010 Well what about an update in the Sticky? I have also not seen anyone recomending to put QPI at 1.6V quite the opposite most say not above 1.4 and to max out at 1.5 but even that may not be good for 24hr normal use. Link to comment Share on other sites More sharing options...
Wired Posted October 18, 2010 Share Posted October 18, 2010 That sticky isn't meant to show only memory that's currently made. It's just a list of timings. Just because it isn't made anymore doesn't mean people don't have it :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.