Chris87 Posted October 17, 2010 Share Posted October 17, 2010 Is this ATTO image correct or shouldnt i be getting a biter faster on the writes as well up to 260ish dont they advertise.Also does anyone know if there will be new firmware realease to read smart data correctly on drives to tell if u have reallocated sectors or anything mine is already 1.1. Link to comment Share on other sites More sharing options...
Heintz.G Posted October 17, 2010 Share Posted October 17, 2010 Your speeds are ok, i take it your O/S is on the drive, the advertised speed is with the drive empty, as a secondary drive. I get 245-275 write read. As for the smart we'll see what happens. Link to comment Share on other sites More sharing options...
garikfox Posted October 17, 2010 Share Posted October 17, 2010 Yeah thats fine, Thats what all the Non-Intel Southbridges get, The 285/275 ATTO results from all the web sites are based from a Intel ICH10 Southbridge Link to comment Share on other sites More sharing options...
sahafiec Posted October 18, 2010 Share Posted October 18, 2010 hi, is it usual to have such a difference in 2k, 4k, 8k read and writes? it seems strange to me (using AMD 870 + SB850 chipset)... http://img227.imageshack.us/img227/9919/attof120.jpg Link to comment Share on other sites More sharing options...
Synbios Posted October 18, 2010 Share Posted October 18, 2010 Yes that's perfectly fine and your drive is running great sahafiec. Link to comment Share on other sites More sharing options...
sahafiec Posted October 18, 2010 Share Posted October 18, 2010 thanks but how about the 2k, 4k and 8k reads and writes? Chris87 gets twice the values I get. I'm a bit concerned about that because that's the most important and heavily used value for SSD's at all. Link to comment Share on other sites More sharing options...
Synbios Posted October 18, 2010 Share Posted October 18, 2010 thanks but how about the 2k, 4k and 8k reads and writes? Chris87 gets twice the values I get. I'm a bit concerned about that because that's the most important and heavily used value for SSD's at all. Maybe I'm missing something but I'm not sure what you mean by him getting twice the values that you get. Your read speeds almost look identical and your write speeds are a little better than his. Link to comment Share on other sites More sharing options...
sahafiec Posted October 18, 2010 Share Posted October 18, 2010 I mean the 0,5k to 8k (especially the 4k) part of the benchmark results. I see up to 50% difference or am I wrong? Chris87: http://img357.yukle.tc/images/1043Chris87a.png sahafiec: http://img357.yukle.tc/images/1337sahafieca.png Link to comment Share on other sites More sharing options...
Synbios Posted October 18, 2010 Share Posted October 18, 2010 I mean the 0,5k to 8k (especially the 4k) part of the benchmark results. I see up to 50% difference or am I wrong? Chris87: http://img357.yukle.tc/images/1043Chris87a.png sahafiec: http://img357.yukle.tc/images/1337sahafieca.png I apologize I was reading the results wrong as I thought the later results were the 4k and 8k tests. The difference in results is probably just system variance. It depends if your OS is installed to the drive, how much you have used the drive, and what controller you're using. Your performance steadies out to the 250-275 MB/sec range so your drive is within spec. I don't think there is much you can do about it to get it any better. Link to comment Share on other sites More sharing options...
sahafiec Posted October 18, 2010 Share Posted October 18, 2010 Can system variance really cause %50 difference in 4k results? We both have non-Intel systems and I'm using AMD 870 + SB850 chipset (motherboard is Asus). Chris87 has only stated 64bit OS, I use Win7 64bit Ultimate - could even be the same as his. My >16k results are within the specs but the 0,5k to 8k are too low I think, compared to other user. I don't really know what to do I mean these reads and writes are the most important and most often used ones. :confused: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 19, 2010 Corsair Employees Share Posted October 19, 2010 Please the whole screen shot of ATTO Please. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.