Dominator GT [SPD profiles needed]

[genetix]

Would need full profiling of 2 block set as clearly I didn't get through to Corsair support while asking ICs. All I want to know is are these ICs exact same or not without official crap. :roll:

 

So, as someone probably here got these blocks:

* CMG6GX3M3A1600C7 3x6GB

* CMG6GX3M3A2000C7 3x6GB

 

I would need 'SPDTool' saved dump of profiling these memory blocks, thanks. :biggrin: :sunglasse

 

(for the forum staff: I am only trying to determ which blocks to buy, if you can answer my question clean straight up would be good as well as profiles.)

[trackrat]

The ICs won't be the same unless the version number on the module is the same. The part number does not tell what ICs are on the module.

[genetix]

The ICs won't be the same unless the version number on the module is the same. The part number does not tell what ICs are on the module.

 

So, I have to yet again play lottery with corsair also ? no go.

 

We're gonna be waiting for profiles I trust they don't change profiles batches much so wanna see what timings there are on each set.

 

-edit-

 

Well, perhaps someone can tell me does the 2000Mhz CL7 set then go CL5-6 1600-1866Mhz ?

[Wired]

CMG6GX3M3A1600C7 = 7-7-7-20

CMG6GX3M3A2000C7 = 7-8-7-20

 

Those are the official specs. What's your end goal? Are you attempting to mix kits (which isn't guaranteed or recommended)?

[genetix]

CMG6GX3M3A1600C7 = 7-7-7-20

CMG6GX3M3A2000C7 = 7-8-7-20

 

Those are the official specs. What's your end goal? Are you attempting to mix kits (which isn't guaranteed or recommended)?

 

Not trying to mix anything. I am trying to buy decent memory which seems incredible hard as with DDR2. I come from using several kits from ******** and

they cannot offer me decent solution because they are running out of blocks and I cannot get them locally.

 

With Corsair story is different on retailer and I am trying to find decent ICs, if an 2000Mhz goes to CL7-8-7-20 where 1600Mhz modules goes to CL7-7-7-20 2000Mhz module ICs most be better for tighter latencies with slower memory speed.

 

Also I found these:

CMT6GX3M3A1600C6 <- Assuming these truthfully would be same ICs as CMG6GX3M3A2000C7 considering how they clock.

 

-edit-

 

but to determ above I would have to see SPD/XMP profiling I believe I've tweaked memory past several years to understand enough from SPD to see where different corsair modules really stands.