mshack102 Posted October 9, 2010 Share Posted October 9, 2010 Ran my WEI and it's only 5.9 with my corsair 128P doesn't that seem far too low? I have latest bios for my P6T and latest intel firmware for my controller Link to comment Share on other sites More sharing options...
Wired Posted October 9, 2010 Share Posted October 9, 2010 WEI's completely useless. Run an ATTO speed test. Link to comment Share on other sites More sharing options...
mshack102 Posted October 9, 2010 Author Share Posted October 9, 2010 WEI's completely useless. Run an ATTO speed test. http://nitrografixx.com/graphics/ssdtest.png HD Tune is showing 133MB/S on read times Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 12, 2010 Corsair Employees Share Posted October 12, 2010 I would suggest using Accronis to make an image of the drive (if you are using Windows) then use Parted magic to Wipe the drive under tools select Erase Disk and Secure Erase and then, install the drive on the system you will be using it as a second HDD and format it with the QUICK Option Only and 4k Allocation then test it with Atto again to be sure its running properly then delete the partition and image the drive back to its original image and you are done. Link to comment Share on other sites More sharing options...
Synbios Posted October 12, 2010 Share Posted October 12, 2010 http://nitrografixx.com/graphics/ssdtest.png HD Tune is showing 133MB/S on read times Those are pretty bad results. I would do as RAM GUY suggested and also look for other ways you could potentially optimize your system. Something is just not right there. Link to comment Share on other sites More sharing options...
Yellowbeard Posted October 13, 2010 Share Posted October 13, 2010 Ran my WEI and it's only 5.9 with my corsair 128P doesn't that seem far too low? I have latest bios for my P6T and latest intel firmware for my controller Check your SSD firmware with CrystalDisk also and post what firmware version you have. Link to comment Share on other sites More sharing options...
mshack102 Posted October 13, 2010 Author Share Posted October 13, 2010 Check your SSD firmware with CrystalDisk also and post what firmware version you have. http://www.nitrografixx.com/image1.png Link to comment Share on other sites More sharing options...
Yellowbeard Posted October 13, 2010 Share Posted October 13, 2010 Based on your picture above, that does not appear to be our drive. Can you please post a picture of the actual SSD? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.