nice.de Posted October 5, 2010 Share Posted October 5, 2010 Hallo, ich habe mir eine F120 gegönnt und wollte Win7 darauf klonen. Leider geht das nicht. Er findet den Datenträger als nicht geeignet. Neuinstallation geht auch nicht. Auch Probleme mit dem Datenträger. In Windows wird er aber erkannt und ich kann auf ihn zugreifen. Das Updatetool findet ihn aber trotzdem nicht! Dachte schon an einen Reset aber gparted startet bei mir nicht. Ich weiß jetz echt net mehr weiter. Hat noch jemand nen Tip für mich? Link to comment Share on other sites More sharing options...
Elprincipal Posted October 6, 2010 Share Posted October 6, 2010 HDD Erase testen. Wichtig: SSD in Sata Port 0 am Mainboard anschließen! Link to comment Share on other sites More sharing options...
nice.de Posted October 6, 2010 Author Share Posted October 6, 2010 Danke, aber HDDErase geht leider auch nicht, da mein Asus Board nicht den IDE Kompatiblitäts Modus unterstützt. Wäre es sinnvoll auf ein Borad zu setzen das AHCI unterstützt? Hab gehört das es sowieso sinnvoll bei SSDs wäre. Link to comment Share on other sites More sharing options...
Elprincipal Posted October 7, 2010 Share Posted October 7, 2010 prinzipiell ist es nur von sekundärer Bedeutung, aber IDE Modus kann jedes Board ;) welches Board nutzt Du? Link to comment Share on other sites More sharing options...
nice.de Posted October 7, 2010 Author Share Posted October 7, 2010 scho klar das mein Asus Striker Extreme einen IDE Anschluß hat ;) Q: Can HDDerase.exe be used to erase my onboard or externally connected (USB, etc.) SATA drives? A: Yes, but some BIOS configuration may be required. Since HDDerase.exe only detects drives on the primary and secondary IDE channels (ports 01F0-01F7 and 0170-0177) the BIOS must be configured so that the SATA drive is detected one of these channels. For onboard SATA drives this can be done by switching the SATA drive from "enhanced mode" to "compatibility mode" in BIOS (compatibility mode is sometimes called "native mode" or "IDE mode"). E.g. BIOS >> IDE configuration >> onboard IDE operate mode >> compatibility mode. Note - not all BIOSs support this feature. Leider geht es nicht, auch nicht mit neustem Bios. Da kommt nur P0 is NONE P1 is NONE. Hab mir jetz ein MSI mit P45 gekauft. IMHO klappt mit dem Board dann auch die Win7 Inst. Link to comment Share on other sites More sharing options...
Elprincipal Posted October 7, 2010 Share Posted October 7, 2010 OK - mit IDE meinte ich aber nicht den IDE Anschluss Du kannst beim Striker einstellen wie dein SATA Anschluss angesprochen werden soll ;) Nunja hauptsache es hat jetzt geklappt. :) Link to comment Share on other sites More sharing options...
nice.de Posted October 9, 2010 Author Share Posted October 9, 2010 So Problem gelöst! Bei dem Asus Board mit 680i Chipsatz kann man nur zwischen SATA und RAID mode unterscheiden was aber keinen Unterschied gemacht hat. Jetzt mit dem MSI Board mit Intel P45 Chipsatz auf AHCI gestellt und die Installation geht ohne Probleme und es läuft perfekt! Link to comment Share on other sites More sharing options...
Elprincipal Posted October 11, 2010 Share Posted October 11, 2010 Alles klar - danke für das Feedback :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.