gunfly Posted October 4, 2010 Share Posted October 4, 2010 Hi, I've activated the XMP in the bios and after a while usen the computer I get a blue screen with the next error code: *** STOP: 0x00000124 (0x0000000000000000, 0xFFFFFA8007558028, 0X00000000FA000000, 0X0000000000400405) I've tried to change the freq to 1333MHz and all works fine. I test it with IntelBurnTest. Why the memory is not able to work at 1600MHZ? Thanks in advance! Link to comment Share on other sites More sharing options...
gunfly Posted October 6, 2010 Author Share Posted October 6, 2010 Well, finally I rise the QPI/DRAM Core from 1.200 to 1.300 and it works OK. If I put taht voltage on Auto it also works OK but the voltage reach 1.363. Now my questions are: 1.- Is this voltage OK? 2.- What's better, put it manually or in Auto? Thank you!! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted October 6, 2010 Corsair Employees Share Posted October 6, 2010 1.3 volts maually set should be fine as long as it is stable. Link to comment Share on other sites More sharing options...
gunfly Posted October 7, 2010 Author Share Posted October 7, 2010 Thank you Ram guy!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.