Bartflaster Posted October 2, 2010 Share Posted October 2, 2010 Hi, This combo should work right ? I have the above and it posted fine at stock motherboard settings (1333 and higher latencies), ran memtest no prob. I then installed OS and some apps, after some odd behaviour I restarted and set the manual timings as per this thread: http://forum.corsair.com/v3/showthread.php?t=88414 But then memtest failed, let the mobo set its stock settings again and still failed. After swapping out the sticks, it would appear one is faulty the other post just fine and clears memtest with stock mobo voltage and 8,8,8,24 @ 1600. So if I RMA, does it have to go to Netherlands from UK as per the PSU's or is there a UK RMA dept ? ... just deciding if returning it direct would be better than going through the supplier ... Link to comment Share on other sites More sharing options...
trackrat Posted October 2, 2010 Share Posted October 2, 2010 I would also test each memory module individually at stock speeds and voltage in both primary channel memory slots to see if you have a Mobo issue. Link to comment Share on other sites More sharing options...
Bartflaster Posted October 2, 2010 Author Share Posted October 2, 2010 Yep, I have done that, slot #1 has 1 stick doing fine, the other stick just throws up lots of errors straight away in the same slot :( Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.