slotrod Posted October 1, 2010 Share Posted October 1, 2010 WEll this is the build i have been taking about. Its my first major build . A bit aggressive but GO BIG OR GO HOME. I hope you all enjoy it Feed back welcome including criticism SPECIAL THANKS Ram Guy & Joseph from marketing for the help with the hotswap bay bracket I messed up CASE CORSAIR 800D BLACK Mountain MODS Triple 120 panel 9x24 blank panel 18x24 blank panel Back plate & I/O Insert both Anodized Black MNPCTECH 360 degree 3x120 2x120 1x 120 2) anodized black fan grills Anodized black Vandal Switch Panel Anodized black custom plate for Aqua Computer Filter X2 Anodized black custom plate for Crystalfontz LCD with project name ODDS & ENDS 3M DI-NOC CARBON FIBER film Black Black Acoustical pad Black 1/16 round hole Modders Mesh CONTROL Aquario 4.0 with power adjust with black face plate Aquacomputer Power adjust 2 (X3) with Black face plate SYSTEM EVGA X58 SLI LE BOARD Processor undecided RAM Corsair Dominator GT 12G of something Storage SSD undecided GPU Either 465X2 or 470x2 PSU Corsair AX1200 LOOP1 Swifttech MPC350 12v ( x2) XSPC Dual Top XSPC RX360 Rad XSPC RASA CPU Cooler Black Primochill 7/16 X5/8 Tubing clear Aqua Filter Aqua Flow Sensor Aqua Ram Plex (X2) Aqua nickel plated res with Black 5 1/2 bay Panel M.I.P.S. Mother board Blocks Black/ Nickel Bitspower Fittings LOOP2 Swifttech MPC350 12v (X2) XSPC Dual Top XSPC RX240 rad Aqua Filter Aqua Flow Sensor Aqua Twin Plex Aqua 465/470 nickel GPU Blocks (x2) back plates If I can find ones to fit Danger Den RES Primochill 7/16 X 5/8 Tubing Clear Extra Stuff MDPC SLEEVE Black & Purple for wires Black 5/8 sleeve for tubing Screws Snap Caps Rivets Clamps Tools Some purple LED's for mood lighting in pump tops and res Vandal 22mm switch Purple LED Vandal 16MM switch purple LED IF I missed anything it wont fit Link to comment Share on other sites More sharing options...
slotrod Posted October 1, 2010 Author Share Posted October 1, 2010 Link to comment Share on other sites More sharing options...
slotrod Posted October 1, 2010 Author Share Posted October 1, 2010 Link to comment Share on other sites More sharing options...
slotrod Posted October 1, 2010 Author Share Posted October 1, 2010 Link to comment Share on other sites More sharing options...
slotrod Posted October 2, 2010 Author Share Posted October 2, 2010 this is where the LCD will be mounted Link to comment Share on other sites More sharing options...
slotrod Posted October 4, 2010 Author Share Posted October 4, 2010 I'm done with the cut and chop part so I took it apart and primed the case so I have a clean canvas to work with. Now we will mount hardware and add holes where needed. THEN take it apart and start over. Link to comment Share on other sites More sharing options...
slotrod Posted October 4, 2010 Author Share Posted October 4, 2010 Aquacomputer power Adjust. This will control pumps and fans through software program. Link to comment Share on other sites More sharing options...
FlawlessSoul Posted October 4, 2010 Share Posted October 4, 2010 Am I the only one not seeing any pictures? :) Link to comment Share on other sites More sharing options...
Wired Posted October 4, 2010 Share Posted October 4, 2010 Abracadabra :) Link to comment Share on other sites More sharing options...
FlawlessSoul Posted October 4, 2010 Share Posted October 4, 2010 Was wondering if it was just me or not :) Looking good! Link to comment Share on other sites More sharing options...
slotrod Posted October 4, 2010 Author Share Posted October 4, 2010 wired what did i do wrong so I dont do it again? Link to comment Share on other sites More sharing options...
Wired Posted October 4, 2010 Share Posted October 4, 2010 wired what did i do wrong so I dont do it again?Nothing. When you post in the gallery I have to approve them manually. Hadn't gotten around to checking yet, that's all :) Link to comment Share on other sites More sharing options...
ttripn123 Posted October 4, 2010 Share Posted October 4, 2010 looks awesome Edward!!!! can't wait to see the end result.... just curious as to why you've decided to go 12Gb RAM...theres some benching done with 12Gb vs 6Gb and the results weren't that impressive with very minimal gains.. Link to comment Share on other sites More sharing options...
slotrod Posted October 5, 2010 Author Share Posted October 5, 2010 Thanks for the info I will look into it. Thanks for the comments Link to comment Share on other sites More sharing options...
ttripn123 Posted October 5, 2010 Share Posted October 5, 2010 Thanks for the info I will look into it. Thanks for the comments you could maybe up your vid cards with the savings by just going with 6Gb RAM.... :laughing::laughing: Link to comment Share on other sites More sharing options...
slotrod Posted October 5, 2010 Author Share Posted October 5, 2010 back door is done if nothing else http://img266.imageshack.us/img266/38/dscf1193x.jpg http://img266.imageshack.us/img266/4649/dscf1195n.jpg Link to comment Share on other sites More sharing options...
slotrod Posted October 14, 2010 Author Share Posted October 14, 2010 alum placed over motherboard tray. now for cable slots http://img98.imageshack.us/img98/4563/dscf1236v.jpg Link to comment Share on other sites More sharing options...
slotrod Posted October 16, 2010 Author Share Posted October 16, 2010 Some of MNPCTECH'S great mind blowing work Plate for my Aqua filter http://img823.imageshack.us/img823/7298/aquacomputerfiltercover.jpg Link to comment Share on other sites More sharing options...
slotrod Posted October 20, 2010 Author Share Posted October 20, 2010 new camera better pictures http://img177.imageshack.us/img177/1166/dscn0019.jpg ] http://img181.imageshack.us/img181/2585/dscn0013u.jpg Link to comment Share on other sites More sharing options...
slotrod Posted October 20, 2010 Author Share Posted October 20, 2010 http://img181.imageshack.us/img181/4562/dscn0010v.jpg http://img181.imageshack.us/img181/4860/dscn0008.jpg Link to comment Share on other sites More sharing options...
slotrod Posted October 22, 2010 Author Share Posted October 22, 2010 some more great work from MNPCTECH:D: This plate will be anodized black and will be mounted below the hotswap door for my LCD http://img168.imageshack.us/img168/6271/corsairlcdplate1.jpg Link to comment Share on other sites More sharing options...
slotrod Posted October 23, 2010 Author Share Posted October 23, 2010 Ok Corsair Guys :cool: I need to pick a SSD for my system files Only what do you recomend.:idea: Link to comment Share on other sites More sharing options...
slotrod Posted October 25, 2010 Author Share Posted October 25, 2010 A little BLING to set off the black and Carbon http://img839.imageshack.us/img839/2192/dscn0061g.jpg http://img839.imageshack.us/img839/6627/dscn0064x.jpg http://img839.imageshack.us/img839/3189/dscn0055o.jpg Link to comment Share on other sites More sharing options...
hmz Posted October 29, 2010 Share Posted October 29, 2010 really looking forward to see the finished product Keep up the good work mate HMZ Link to comment Share on other sites More sharing options...
slotrod Posted October 29, 2010 Author Share Posted October 29, 2010 Thanks HMZ Mid shelf plate still needs wet sanded cleared and polished http://img820.imageshack.us/img820/6108/dscn0082w.jpg http://img820.imageshack.us/img820/4755/dscn0085q.jpg back side of motherboard tray cover front will be covered in CARBON http://img820.imageshack.us/img820/6757/dscn0088q.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.