corsaros Posted September 30, 2010 Share Posted September 30, 2010 hi to everyone i have a problem with those stiks,when i am try to overcome 1452mhz my pc not start or i see bsod, i can get my cpu easily to 3.82 (400x8.5) but only if i keep manualy ram at low levels please some help:[pouts: p.s sorry about my bad english my system motherboard :ASUS P5QC 775 cpu : core 2 quad Q9550 2.83 ram: 2x1 gb CORSAIR DDR3 XMS3 CM3X1024-1333C9 card:ATI RANDEON HD 4650 psu: 2 in 1 550 + 450 watt (there is no proplem with 2 psu's I have tried with meny psu) OS: WINDOWS 7 ULTIMATE 64bit this the o.ced with ram manualy keeped low http://i53.tinypic.com/1zmh8k4.jpg and this is the highest if i follow the bios auto settings http://i56.tinypic.com/23v0205.jpg http://i55.tinypic.com/2i92kb5.jpg http://i54.tinypic.com/ndttoj.jpg Link to comment Share on other sites More sharing options...
Synthohol Posted September 30, 2010 Share Posted September 30, 2010 buy some DDR1600? trying to push DDR1333 that high might kill the sticks (or just not boot as you have seen) Link to comment Share on other sites More sharing options...
corsaros Posted September 30, 2010 Author Share Posted September 30, 2010 so I'm thinking about this, I will get 1600, it will be a solution or there will be a problem with this particular motherboard? thank u for your time Link to comment Share on other sites More sharing options...
Synthohol Posted September 30, 2010 Share Posted September 30, 2010 after further research DDR1600 will not help you. you will need a new CPU then like a core 2 extreme that supports 1600 speed. yours will not. 1452 is not bad for ddr1333 at all. if anything, start raising your multiplier and lower the bus speed until you find a better balance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.