Jump to content
Corsair Community



Recommended Posts

  • Corsair Employees
BIOS and software readings can be fairly inaccurate. You might try updating the BIOS and using some different software to measure the voltages to see if the results are consistent. The only way to get a definite reading is to measure the rail with a volt meter or PSU tester. If the 12v rail were really at 14v or higher, its unlikely that the system would be stable, there are circuits built into the PSU which would tell it to shut down if something were to go drastically out of spec.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...