re_ Posted September 16, 2010 Share Posted September 16, 2010 I have dfi lamparty x58 t3h6 with 6gb of ram (TR3X6G1600C8D) but the bios read only 4GB. Operating system is windows 7 64 bit. I tried all bios (beta and testet) but it is the same. Window 7 in computer->properties show: Memory installed 6GB(4GB usable) The program cpu-z in spd table show all the memory banks. I tried one bank at time and it is ok, i suppose the memory banks are ok. After several trials slot memory dimm4 is the problem. When I install the memory bank in dimm4 bios not read it. Bios read only memory banks in slot dimm2 and dimm6. Are corsair TR3X6G1600C8D compatible with dfi t3h6? Corsair Site tell that this memory work with this motherboard but in memory support dfi site don't report this memory. Thank you for your help Link to comment Share on other sites More sharing options...
Wired Posted September 16, 2010 Share Posted September 16, 2010 Enable XMP in the BIOS. If it still won't recognize any stick in that slot, then it's either slot 4, or the memory controller in your CPU. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.