Dhokho Posted September 16, 2010 Share Posted September 16, 2010 Hello, I have bought a I7 930 and a P6X58D-E for the motherboard. I put three channel ram corsair CMP6GX3M3A1600C8 on the motherboard but i have a problem. The bios only recognize 4GB. What is the problem? I read a lot of forum and the problem is known by a lot of users. They say succeed only with a configuration of voltage ram/QPI and delta voltage. It is possible but i have no information about the good vakues to put. I try the three ram with memtest and evirything is ok. CPU Z recognize the 6GB but it is the only ( windows and bios just recognize 4GB). Thans for your help and sorry for my english. Link to comment Share on other sites More sharing options...
Dhokho Posted September 16, 2010 Author Share Posted September 16, 2010 please help me if possible; i have no idea about my problem with this ram :/ Link to comment Share on other sites More sharing options...
ritaylor Posted September 16, 2010 Share Posted September 16, 2010 First, check each module by itself in the first slot. That will eliminate any dead sticks. Link to comment Share on other sites More sharing options...
Dhokho Posted September 16, 2010 Author Share Posted September 16, 2010 i have already do it and every module is ok Link to comment Share on other sites More sharing options...
ritaylor Posted September 16, 2010 Share Posted September 16, 2010 Have you removed the cpu and checked the socket for any bent pins? Link to comment Share on other sites More sharing options...
Dhokho Posted September 16, 2010 Author Share Posted September 16, 2010 It is ok, i found the problem. One module work only if it is the only module on the motherborad. If i put it with an other or with the two others, the bios doesn't recognize it. I will contact corsair for change this module. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.