Jump to content
Corsair Community

eVGA LE + CMT6GX3A2000C8 NO BOOT


n3wbi379

Recommended Posts

ok guys i got a eVGA LE and i bought new Corsair GT's 2000mhz (CMT6GX3A2000C8)

 

After installing and selecting XMP Profile it freezes and doesn't boot.

Even if i dint select that profile and leave it on standard timing (1333 9-9-9-24) it BSOD.

 

After a quick search on the corsair site it list that my ram will not work with my MB.

 

http://www.corsair.com/configurator/product_results.aspx?id=1048902

 

Is this correct, this ram will not work with this mb?

 

Iv got a classified on the way but am just confirming it doesn't work?

Link to comment
Share on other sites

After a quick search on the corsair site it list that my ram will not work with my MB.
That's not correct. Just because it's not listed doesn't necessarily mean it's not compatible. CMT6GX3A2000C8 = CMG6GX3A2000C8 + Airflow Pro connector

 

It should work just fine.

Link to comment
Share on other sites

  • Corsair Employee
Update to the latest bios and manually set the timings and voltages. Set the timings to 8-8-8-24-2T and the memory voltage to 1.65v. You will also need to set the QPI/VTT voltage to 1.25v. After that try setting the memory frequency to 1600MHz then see if that runs. Then try 1866MHz then finally try 2000MHz.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...