Jump to content
Corsair Community

problem


Recommended Posts

thanks

That was the software i was using before with all my HD.

I check on thier site for compatibility and they have some ssd wonking but not this exact model..

I guess it's not completely reliable..

Any other tool to advice??

 

Thank

Link to comment
Share on other sites

Haven find any 3 party programs, but my chipset drivers "Intel Rapid Storage"(RST) have somekind automatic badsectorlooking.

 

I dont know your spec's but i suggest to look your storage driver controllers for any info..

Link to comment
Share on other sites

I would think that, the driver that conttrols those SSD, would know something of SSD situation.

 

Here is picture of that program(Finnish version). But this works only with Intel controlers. There can be similar progs for other controllers build in, just have to look for them.

rapid.jpg.434b7702cb285420a516e8f00813c1e3.jpg

Link to comment
Share on other sites

Hi,

Are you sure that program know what is SSD or even how it works? After all its Hard Disk Sentinel, so i bet it say that for all SSD's, after some use...

 

I tried cristalDiskInfo and this is the screen

 

http://img252.imageshack.us/img252/373/ssdv.jpg

 

How is possible that after only 4 days heath is dropped at 96%, what do I have to except after one month??

 

Thanks

Link to comment
Share on other sites

Plz, input your, spec's and drivers version of sata controler.

 

And note that, its not anything like HDD, so it may survive, bigger physical hit then HDD(Dont try it at home) and so on calculation SSD health isnt so easy thing foward.

Link to comment
Share on other sites

it's a notebook

The model is gateway fx-7811

 

Mainboard : Gateway IMV

Chipset : Intel PM45

Processor : Intel Mobile Core 2 Duo P8400 @ 2266 MHz

Physical Memory : 4096 MB (2 x 2048 DDR3-SDRAM )

 

 General Information :	 
M1 (Bank 0 ) :	2048 MB - SODIMM 
M2 (Bank 1 ) :	2048 MB - SODIMM 

Information SPD EEPROM (M1) :	 
Manufacturer :	Samsung 
Part Number :	M471B5673DZ1-CF8   
Serial Number :	1294E4618D728517 
Specification :	F 
Type :	DDR3-SDRAM PC3-8500 (533 MHz)  -  [DDR3-1067] 
Format :	SO-DIMM (67.6 x 15) 
Size :	2048 MB (2 ranks, 8 banks) 
Module Buffered :	No 
Module Registered :	No 
Module SLi Ready (EPP) :	No 
Module XMP :	No 
Width :	64-bit 
Error Correction Capability (EC...	Unspecified 
Prefetch Buffer :	8-bit 
Manufacture :	Week 26 of 2008 
Thermal Sensor :	No 
Heat Spreader :	No 
Supported Frequencies :	457 MHz, 533 MHz, 610 MHz 
CAS Latency (tCL) :	6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz 
RAS to CAS (tRCD) :	6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz 
RAS Precharge (tRP) :	6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz 
Cycle Time (tRAS) :	18 clocks @ 457 MHz, 20 clocks @ 533 MHz, 23 clocks @ 610 MHz 
Min TRC :	24 clocks @ 457 MHz, 27 clocks @ 533 MHz, 31 clocks @ 610 MHz 

Information SPD EEPROM :	 
Manufacturer :	Samsung 
Part Number :	M471B5673DZ1-CF8   
Serial Number :	38294E4618D72851 
Specification :	F 
Type :	DDR3-SDRAM PC3-8500 (533 MHz)  -  [DDR3-1067] 
Format :	SO-DIMM (67.6 x 15) 
Size :	2048 MB (2 ranks, 8 banks) 
Module Buffered :	No 
Module Registered :	No 
Module SLi Ready (EPP) :	No 
Module XMP :	No 
Width :	64-bit 
Error Correction Capability (EC...	Unspecified 
Prefetch Buffer :	8-bit 
Manufacture :	Week 26 of 2008 
Thermal Sensor :	No 
Heat Spreader :	No 
Supported Frequencies :	457 MHz, 533 MHz, 610 MHz 
CAS Latency (tCL) :	6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz 
RAS to CAS (tRCD) :	6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz 
RAS Precharge (tRP) :	6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz 
Cycle Time (tRAS) :	18 clocks @ 457 MHz, 20 clocks @ 533 MHz, 23 clocks @ 610 MHz 
Min TRC :	24 clocks @ 457 MHz, 27 clocks @ 533 MHz, 31 clocks @ 610 MHz 

Memory Controller Information :	 
Memory Controller :	System Memory 
Location :	Mainboard 
Error Correction Capability :	No 
Number of connectors :	2 
Max. Module Size :	4096  MB 

 

Video Card : NVIDIA GeForce 9800M GTS

Hard Disk : Corsair (60 GB)

DVD-Rom Drive : Optiarc DVD RW AD-7583S ATA Device

Monitor Type : AUO - 17 inches

Network Card : MV88SE614x PCIe to SATA2 controller Yukon 88E8071 PCIe Gigabit Ethernet Controller

Network Card : Wireless WiFi Link 5100

Operating System : Windows 7 Ultimate Professional 6.01.7600 (x64)

DirectX : Version 11.00

Windows Performance Index : 5.9 on 7.9

 

 

 

here the msinfo32 result

 

Rapporto System Information disponibile in: 07/28/10 12:18:42
Nome sistema: GAME-STATION
[iDE]

Elemento	Valore	
Nome	ATA Channel 0	
Produttore	(Controller IDE ATA/ATAPI standard)	
Stato	OK	
ID periferica PNP	PCIIDE\IDECHANNEL\4&2F2D1470&0&0	
Driver	c:\windows\system32\drivers\atapi.sys (6.1.7600.16385, 23.56 KB (24,128 Byte), 7/14/2009 1:19 AM)	

Nome	ATA Channel 1	
Produttore	(Controller IDE ATA/ATAPI standard)	
Stato	OK	
ID periferica PNP	PCIIDE\IDECHANNEL\4&2F2D1470&0&1	
Driver	c:\windows\system32\drivers\atapi.sys (6.1.7600.16385, 23.56 KB (24,128 Byte), 7/14/2009 1:19 AM)	

Nome	Intel(R) ICH9M/M-E Family 4 Port SATA AHCI Controller - 2929	
Produttore	Intel	
Stato	OK	
ID periferica PNP	PCI\VEN_8086&DEV_2929&SUBSYS_0696107B&REV_03\3&11583659&0&FA	
Porta I/O	0x000018F0-0x000018F7	
Porta I/O	0x000018E4-0x000018E7	
Porta I/O	0x000018E8-0x000018EF	
Porta I/O	0x000018E0-0x000018E3	
Porta I/O	0x000018C0-0x000018DF	
Indirizzo memoria	0xF3504000-0xF35047FF	
Canale IRQ	IRQ 19	
Driver	c:\windows\system32\drivers\msahci.sys (6.1.7600.16385, 29.56 KB (30,272 Byte), 7/14/2009 2:01 AM)	

Nome	ATA Channel 4	
Produttore	(Controller IDE ATA/ATAPI standard)	
Stato	OK	
ID periferica PNP	PCIIDE\IDECHANNEL\4&2F2D1470&0&4	
Driver	c:\windows\system32\drivers\atapi.sys (6.1.7600.16385, 23.56 KB (24,128 Byte), 7/14/2009 1:19 AM)	

Nome	ATA Channel 5	
Produttore	(Controller IDE ATA/ATAPI standard)	
Stato	OK	
ID periferica PNP	PCIIDE\IDECHANNEL\4&2F2D1470&0&5	
Driver	c:\windows\system32\drivers\atapi.sys (6.1.7600.16385, 23.56 KB (24,128 Byte), 7/14/2009 1:19 AM)

Link to comment
Share on other sites

Ok,

You have, Intel® ICH9M/M-E Family 4 Port SATA AHCI Controller - 2929. That use "MSAHCI 6.1 -driver" now.

 

So you may try, Intels new 9,6 RST driver if you like. They may give you some more speed. But make Backups before trying it.

Link to comment
Share on other sites

it istalled the latest driver from intell

Nome	Intel(R) ICH9M-E/M SATA AHCI Controller
Produttore	Intel
Stato	OK
ID periferica PNP	PCI\VEN_8086&DEV_2929&SUBSYS_0696107B&REV_03\3&11583659&0&FA
Porta I/O	0x000018F0-0x000018F7
Porta I/O	0x000018E4-0x000018E7
Porta I/O	0x000018E8-0x000018EF
Porta I/O	0x000018E0-0x000018E3
Porta I/O	0x000018C0-0x000018DF
Indirizzo memoria	0xF3504000-0xF35047FF
Canale IRQ	IRQ 19
Driver	c:\windows\system32\drivers\iastor.sys (9.6.0.1014, 528.02 KB (540,696 Byte), 7/28/2010 6:40 PM)

anf rialinged all partitions whit paragon aligment tool and this is the test

http://img833.imageshack.us/img833/4791/ssdallnew96intel.jpg

 

I got 7.6 from wondow index experiece now so I guess is pretty good :biggrin:

just for records the previus test was done as secondary Hard disk..

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...