Jump to content
Corsair Community

RMA request for TWIN2X2048-8500C5D ver2.1

Recommended Posts

Hi and sorry for my bad english,


Sir RAMGUY ,I ve a problem with running my Corsair Dominator CM2X2048-8500C5D (5-5-5-15,1066,2.1v ver2.1). suddenly i have a BSOD on my system When I run my system for more than 12 hours,after bsod when I checked my rams one by one with memtest i received an error on 1 of my RAM stick


I tried with one stick, it works fine (more than 24 hours test).. but i have problem (bsod) when i try another stick, after bsod when I checked with memtest i received an error.


I think one of the ram is damaged.


My questions sir, can i RMA request for this problem?


Thank you in advance for your reply.

Link to comment
Share on other sites

  • Corsair Employees
I am sorry but you can only replace that part as a set so you will need to get the set replaced. We cannot replace just one module. And if you have 2.0 Gig modules the part number for the set would be TWIN2X4096-8500C5D
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...