Jump to content
Corsair Community

Program Crashes & BSOD w/ TWIN2X4096-6400C5C


Recommended Posts

I just replaced 2GB (2x1GB) of ******** BL2KIT12864AA804 with 4GB (2x2GB) of Corsair TWIN2X4096-6400C5C. Before the switch everything had been running rock solid for 2 years. After the switch I immediately started getting random program crashes and even the occasional BSOD. I switched back to the ******** RAM and everything was fine again. I ran a few passes of Memtest86+ on the Corsair RAM without error. Do you think the Corsair RAM is bad despite having passed Memtest or are there other reasons my system would be completely stable with 2GB of RAM but not with 4GB? Of course Windows XP (32-bit) only recognized 3.5GB but I was expecting that.


PS: Nothing else was changed and in both cases I'm running everything at stock settings, no overclocking.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...