Jump to content
Corsair Community

H50 stripped rad screw wholes...


Jayde

Recommended Posts

The screws that hold the fan onto the rad are 6-32 x 1 1/4 machine screws. You will have to go to a larger size screw. The next size up is a 8-32, you will have to drill the hole and cut new threads using a threading tap. The hole must be the correct size for the tap. Alternativly and perhaps easier is to use a #8 sheet metal screw which will cut it own threads. You will probably have to drill the holes in the fan larger as well in either case.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...