Jump to content
Corsair Community

CMG6GX3M3A2000C8 xmp fail


BoNet

Recommended Posts

Hi,

 

Im not able to run my 3x2gb Dominator GT CMG6GX3M3A2000C8 @ 2000mhz.

 

I loaded default bios settings, rebooted and selected X.M.P in Ai overclock.

I get bsod when loading windows 7 and then loops into a reboot cycle.

I ran Memtest86+ V4.00 and the computer locks up around 20% on PASS1.

 

Computer is stable when Ai overclock is set to AUTO, but then my dominators are running @ 1333mhz which is not optimal :[pouts:.

 

Any suggestions are welcome to make this kit work.

Link to comment
Share on other sites

  • 1 month later...
Hi,

 

Im not able to run my 3x2gb Dominator GT CMG6GX3M3A2000C8 @ 2000mhz.

 

I loaded default bios settings, rebooted and selected X.M.P in Ai overclock.

I get bsod when loading windows 7 and then loops into a reboot cycle.

I ran Memtest86+ V4.00 and the computer locks up around 20% on PASS1.

 

Computer is stable when Ai overclock is set to AUTO, but then my dominators are running @ 1333mhz which is not optimal :[pouts:.

 

Any suggestions are welcome to make this kit work.

 

hey there, i have the 1600 version of your memory, and yes it fails badly with xmp profiles, i can only can make it work 7-7-7-20-88-2T @1.65V 1600mhz .

1T no possible no matter what and see tRFC is 88! lol... absolutely fail...epic fail memory.

Link to comment
Share on other sites

Hi,

 

Im not able to run my 3x2gb Dominator GT CMG6GX3M3A2000C8 @ 2000mhz.

 

I loaded default bios settings, rebooted and selected X.M.P in Ai overclock.

I get bsod when loading windows 7 and then loops into a reboot cycle.

I ran Memtest86+ V4.00 and the computer locks up around 20% on PASS1.

 

Computer is stable when Ai overclock is set to AUTO, but then my dominators are running @ 1333mhz which is not optimal :[pouts:.

 

Any suggestions are welcome to make this kit work.

 

Test each module individually for 3-5 passes each using Memtest, linked to your left. Clear the BIOS, use 1 module, select XMP and test. Also, be sure to disable Legacy USB Support for the testing as it conflicts with Memtest.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...