uscool Posted March 2, 2010 Share Posted March 2, 2010 Hi, I have a X64 with 2.0 firmware on it, so i got a new motherboard, installed x64 , booted parted magic and worked secure erased, but reinstalled windows 7 again, now i cant secure erase using parted magic, says its frozen (locked etc ), have reinstalled windows 7 using the windows setup and format option, does windows format now erase drive now cause of the firmware 2.0 working ? Thanks Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 3, 2010 Corsair Employees Share Posted March 3, 2010 No connect the drive then boot with parted magic then once the HDD/CD light stops blinking dis-connect the power then give it about 60 Seconds and dis-connect the Data Cable to the drive then wait about 30 Seconds and re-connect the Data cable then the power cable and then run the secure erase. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.