mbhullar1 Posted February 24, 2010 Share Posted February 24, 2010 how to you remove the 800d motherboard and psu section divider Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 24, 2010 Corsair Employee Share Posted February 24, 2010 Unfortunately it is not removable. Link to comment Share on other sites More sharing options...
R3APER Posted February 25, 2010 Share Posted February 25, 2010 I did it on mine to fit the 4 way board it requires removing the 4 rivets holding the divider in and the hdd cages from the bottom very easy and painless job. http://forum.corsair.com/v3/showthread.php?t=85281 Link to comment Share on other sites More sharing options...
Yellowbeard Posted February 25, 2010 Share Posted February 25, 2010 Perhaps a clarification is that it is not designed to be removable. But, I'm sure those rivets drill out easily. @ R3aper, did you have any trouble getting to the rivets? Link to comment Share on other sites More sharing options...
R3APER Posted February 25, 2010 Share Posted February 25, 2010 Perhaps a clarification is that it is not designed to be removable. But, I'm sure those rivets drill out easily. @ R3aper, did you have any trouble getting to the rivets? No trouble at all, the ones for the bottom hdd cages id say where a little tricky but no the point where you wanna break something if you kniow what i mean. Overall with the help of my bro we had them drilled and the parts out in a few mins. I was planning on leaving it out but it detracted from the case look imo. Link to comment Share on other sites More sharing options...
MI-Tazz Posted February 26, 2010 Share Posted February 26, 2010 How about posting a picture of that area from the other side so they can get a better idea. Might make it easier for the ones that want to try it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.