Jump to content
Corsair Community

Blu screen!!


Morinho

Recommended Posts

Hello guys.

I write because I have a problem with my system.

I installed Windows 7 to 64 bits, the problem is that I get the same old blue screen of the Windows operating system. I can not tell if the problem stems from RAM or is it a problem of incompatible driver.

Here's my system:

 

ASUS P5QL/EPU

2 * 2GB Corsair CM2X2048-8500C5 (2.10 V ver.1.2)

INTEL Q8300 4MB 2.5GHz 1333MHz FSB

SEAGATE Barracuda 7200.12 ST31000528AS 1TB SATAII 7200rpm 32MB

ASUS EAH4650 1GB HDMI Full HD 1080p

WINDOWS 7 64bit

 

Is the message of the blue screen:

 

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

 

The problem seems to be caused by the following file: ntoskrnl.exe

 

KMODE_EXCEPTION_NOT_HANDLED

 

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

 

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

 

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

 

Technical Information:

 

*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff88002658ea0, 0x0000000000000000,

0x0000000000000000)

 

*** Ntoskrnl.exe - Address 0xfffff80002c78f00 base at 0xfffff80002c07000 DateStamp

0x4a5bc600

 

 

In your opinion what is the real problem?

Thanks to all.

Link to comment
Share on other sites

Hello guys.

I write because I have a problem with my system.

I installed Windows 7 to 64 bits, the problem is that I get the same old blue screen of the Windows operating system. I can not tell if the problem stems from RAM or is it a problem of incompatible driver.

Here's my system:

 

ASUS P5QL/EPU

2 * 2GB Corsair CM2X2048-8500C5 (2.10 V ver.1.2)

INTEL Q8300 4MB 2.5GHz 1333MHz FSB

SEAGATE Barracuda 7200.12 ST31000528AS 1TB SATAII 7200rpm 32MB

ASUS EAH4650 1GB HDMI Full HD 1080p

WINDOWS 7 64bit

 

Is the message of the blue screen:

 

A problem has been detected and Windows has been shut down to prevent damage

to your computer.

 

The problem seems to be caused by the following file: ntoskrnl.exe

 

KMODE_EXCEPTION_NOT_HANDLED

 

If this is the first time you've seen this stop error screen,

restart your computer. If this screen appears again, follow

these steps:

 

Check to make sure any new hardware or software is properly installed.

If this is a new installation, ask your hardware or software manufacturer

for any Windows updates you might need.

 

If problems continue, disable or remove any newly installed hardware

or software. Disable BIOS memory options such as caching or shadowing.

If you need to use safe mode to remove or disable components, restart

your computer, press F8 to select Advanced Startup Options, and then

select Safe Mode.

 

Technical Information:

 

*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff88002658ea0, 0x0000000000000000,

0x0000000000000000)

 

*** Ntoskrnl.exe - Address 0xfffff80002c78f00 base at 0xfffff80002c07000 DateStamp

0x4a5bc600

 

 

In your opinion what is the real problem?

Thanks to all.

 

 

I think I understand the problem.:sunglasse

I did several test before getting a good result. I set my RAM at a frequency of 1066 MHz, leaving the voltage in Auto, the DRAM Timing Control to 5-5-5-15.

BIOS I set the Memory Remap Feature on 'enable', this is the cause of the instability of the system!

Putting on the Memory Remap Feature Disabled, the system has stabilized. Windows works only with 3:25 GB of RAM.

 

Now my question is this, it is possible that 64-bit Windows 7 is not able to fully manage my Corsair RAM and with my ASUS motherboard?

 

PS: My BIOS is updated to the latest available version.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...