Jump to content
Corsair Community

MSI 790GX-G65 with TW3X4G1333C9 Random BSODs


Cellsurf

Recommended Posts

My system functions but occasionally has random BSODs. With all settings set to AUTO in bios and running (+24HRs/27 Passes) MemTest86+ V4.0, I got 1 error in test #8 on pass #4.

 

I notice that defaults had set RAM to 9-9-9-24 but with a Command Rate of 1T. I changed CR to 2T and ran MemTest86+ again. This time it got multiple errors on test #8 (+10hrs/11 passes, 3 errors all in Test #8 on the 8th pass).

 

I returned the CR setting to AUTO (which set CR to 1T again). I then manually set DRAM voltage up .05 to 1.55 and re-ran Memtest86+. Now I have 1 error again after +11hrs/13 passes. Error again is on test #8. However the pass # is zero (0) and this did not display until several hours after the start of the test.

 

The RAM was purchased at Fry's and was recommended by their tech. Not sure if it is significant but there is a "G" after the model number.

(09350137) TW3X4G1333C9 G

 

What is the recommended next step? Thank you.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...