last_exile Posted May 11, 2010 Share Posted May 11, 2010 Here's my PC. It was originally gonna be the world's smallest liquid cooled PC, but something leaked and so i swapped out for a corsair H50. some pics... compared to a pencil pouch... http://img710.imageshack.us/img710/3100/img0477qi.jpg inside... It's tiny. i was barely able to fit anything in there. http://img17.imageshack.us/img17/5003/img0479nk.jpg It's 20cm x 20cm x 20cm. Here you can see the H50 barely making it in there... http://img691.imageshack.us/img691/4793/img0480fx.jpg Link to comment Share on other sites More sharing options...
PSH1138 Posted June 2, 2010 Share Posted June 2, 2010 Here's mine. It's just a temporary build though as I am going full WC soon. http://www.paulheenan.com/pc/Core.JPG Link to comment Share on other sites More sharing options...
Sniper2k0ne Posted June 17, 2010 Share Posted June 17, 2010 Here is my Corsair 800D Build all complete with the H50 installed, Pic is on the attachments. Not to sure how alot of the guys here hide some of the wires but mine looks good I'm sure. System Spec's are listed under System Spec. I'll put a new pic of the build in a little bit, have changed the inside but not by much. Posted a pic of my before hiding wires & after in the 800d I use for my build. Link to comment Share on other sites More sharing options...
TravisFTW Posted June 17, 2010 Share Posted June 17, 2010 here is mine in all its glory http://img243.imageshack.us/img243/4985/cimg2344.jpg http://img340.imageshack.us/img340/4943/cimg2310.jpg http://img340.imageshack.us/img340/4075/cimg2350p.jpg http://img693.imageshack.us/img693/3672/cimg2352wx.jpg Link to comment Share on other sites More sharing options...
sbely Posted June 20, 2010 Share Posted June 20, 2010 Hmmm hope these pics get through. My build with Obsidian, its great for cable management. I am very satified with H-50, running quietly, and specs are sub 30 at idle , ma at 59-62 under tests. I added 3 yates at top exhausing. SSD drive really great, very noticeable improvement in boot up times and overall performance. Finally the 4850 toxic is great, runs very cool and not a power hog. Thanks Corsair for great products and support Steve Link to comment Share on other sites More sharing options...
Sniper2k0ne Posted June 21, 2010 Share Posted June 21, 2010 Why are you not taking advantage of the cabling grommets, you could easily hide 95 % of the cabling, and improve internal airflow If that was toward my system spec, already getting very good airflow but also tried hiding more cables but no luck. Link to comment Share on other sites More sharing options...
Rasta_nz Posted June 22, 2010 Share Posted June 22, 2010 What is the brand name fans you are using on your H50 setup,it looks really good and clean.. x2 Cooler Master Excalibur Fans (R4-EXBB-20PK-R0) Dual GTX285 Classifieds....What Psu are you powerering those beasts with??? I couldnt fit another Classified in my Lian Li PC-7FW case. I tried in slot 2 and "clunk" Rear heat sink hits the HD Rack. Nice build!! Gigabyte Odin 1200watt PSU, Thanks. Sorry for late reply. Link to comment Share on other sites More sharing options...
sbely Posted June 22, 2010 Share Posted June 22, 2010 If that was toward my system spec, already getting very good airflow but also tried hiding more cables but no luck. No I think it was towards slotrod's post, but think he re-posted with all cables going through grommets, much better..Looks great Link to comment Share on other sites More sharing options...
kwisatzhaderach Posted July 4, 2010 Share Posted July 4, 2010 http://i283.photobucket.com/albums/kk293/luv2eather/Intel%20980X%20Build/Intel980XBuild004-1.jpg Link to comment Share on other sites More sharing options...
drady Posted July 17, 2010 Share Posted July 17, 2010 Hi guys, Anyways wanted to share a few picks of my NZXT case/build in progress. FYI, running Prime 95 @ 100% load @ 3.8 ghz temps don't go over 66'C with case ambient not going over 35'C - Room temp is 23'C (at default clock/idle its 31'c case and 10'C CPU!) . I replaced the side and front fans with Coolmaster 90cfm 120mm's. Anyways buzz me if you have questions. drady Link to comment Share on other sites More sharing options...
sbely Posted July 18, 2010 Share Posted July 18, 2010 Looks great! i see push pull config, didn't have room for both inside?, where are you plugging your H 50 fans into? show us an overall shot, like to to what the lexa looks like, is that the one with the curved front? Congrads! Link to comment Share on other sites More sharing options...
drady Posted July 18, 2010 Share Posted July 18, 2010 Thanks. I could put both fans into the case, however I would have to sacrifice the top 120mm fan at the back, which is no problem as there is another one there, so in theory it could one passive and one active top exhaust. I chose to put the other one externally because the lexa have dedicated holes to allow for it. Both fans are plugged into the m/b, one being the CPU fan (bios set to 100%). The H50 pump is attached to a 12volt molex as I wanted to make sure it got full power. I've added a pic of the overall setup, sorry, contrast is shocking!. Here is the link to the case though - http://www.nzxt.com/new/products/crafted_series/lexa_s I was going to get a full tower, but the case had to fit on the desk and have the front cover so my kiddies would get in strife etc etc. Link to comment Share on other sites More sharing options...
sbely Posted July 19, 2010 Share Posted July 19, 2010 Cute....i have a family of mice living in my Logitech sub woofer, even playing Ozzie won't dislodge them....I am very pleased with the H 50, it performs as stated, is really simple to install, and is certainly good enough for moderate overclocking, would never go back to a big bulky air coolerand would go with full water cooled only if temps required it. Kudos to Corsair!! Drady, that lexa looks nice, black and white fans must complement the corsair look as well...nice build Steve Link to comment Share on other sites More sharing options...
slimbrady Posted July 24, 2010 Share Posted July 24, 2010 some very nice looking builds here. here is mine, still playing around with the positioning of the H50....was hoping to set it up as a front intake but doesn't quite reach....idle temp is around 38c with my 1090T oc'd to 4ghz. Going to do some position tests here in a bit to see if i can get that lower. http://i29.tinypic.com/359cr5s.jpg http://i28.tinypic.com/dxzk0h.jpg **moved the h50 to just above the HDD enclosure and moved my dvd-r up 1 slot to mount the radiator as a front push/pull intake(reseated cpu and applied new TIM) am seeing 33ish idle temps 64ish load but hit 69c after 5th or 6th self-test in prime95 and ended the torture test because I didn't want to go past that with this new cpu =P 25% overclock Link to comment Share on other sites More sharing options...
B-Sal Posted July 27, 2010 Share Posted July 27, 2010 This is mine, sorry about the camera quality. http://i827.photobucket.com/albums/zz192/BSNX570/P7251033.jpg http://i827.photobucket.com/albums/zz192/BSNX570/P7251037.jpg http://i827.photobucket.com/albums/zz192/BSNX570/P7251036.jpg Link to comment Share on other sites More sharing options...
Vengar Posted July 29, 2010 Share Posted July 29, 2010 Hi All, I got a better camera and made some upgrades so I thought I'd post new pics. I threw in one of my htpc too which I am using an H50 in as well. Link to comment Share on other sites More sharing options...
KHz Posted August 13, 2010 Share Posted August 13, 2010 nothing too elaborate. more photos & information to come later. external rad-mount w/ pull setup. http://i181.photobucket.com/albums/x279/KHZspeed/Ect/Picture001.jpg http://i181.photobucket.com/albums/x279/KHZspeed/Ect/untitled.jpg Link to comment Share on other sites More sharing options...
tpavur Posted August 19, 2010 Share Posted August 19, 2010 http://i938.photobucket.com/albums/ad228/tpavur/IMG_1484.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1482.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1481.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1478.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1477.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1476.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1474.jpg http://i938.photobucket.com/albums/ad228/tpavur/IMG_1470.jpg Link to comment Share on other sites More sharing options...
tpavur Posted August 19, 2010 Share Posted August 19, 2010 This is mine, sorry about the camera quality. Why is the logo upside down on your H50? Link to comment Share on other sites More sharing options...
Wired Posted August 19, 2010 Share Posted August 19, 2010 It's because of the orientation of the pump. Link to comment Share on other sites More sharing options...
B-Sal Posted August 20, 2010 Share Posted August 20, 2010 It's because of the orientation of the pump. Wired, do you think it would improve cooling performance if i flipped the pump 180 degrees? Link to comment Share on other sites More sharing options...
Yellowbeard Posted August 20, 2010 Share Posted August 20, 2010 Wired, do you think it would improve cooling performance if i flipped the pump 180 degrees? No, not at all. Pump orientation has no affect on performance with these coolers. Link to comment Share on other sites More sharing options...
Wired Posted August 20, 2010 Share Posted August 20, 2010 What he said :) Link to comment Share on other sites More sharing options...
tpavur Posted August 20, 2010 Share Posted August 20, 2010 when it comes to fluid dynamics... You want your inlet/outlet at the lowest point for the most efficient flow rate. Link to comment Share on other sites More sharing options...
Darkcyde Posted September 8, 2010 Share Posted September 8, 2010 My rig. http://img.photobucket.com/albums/v670/sevenem/ed9cd2bd.jpg http://img.photobucket.com/albums/v670/sevenem/a53aecfb.jpg http://img.photobucket.com/albums/v670/sevenem/f0027a7c.jpg Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.