Jump to content
Corsair Community

Intel DP55WB + CM3X2G1600C9DHX instability


Recommended Posts

Hi, I am running


Core i7 860

Intel DP55WB (Firmware: WBIBX10J.86A.0165.2009.1110.1916 - 11/10/2009)

CM3X2G1600C9DHX (2x 2GB kit)

ATI 4670 (low power for testing)

700W ******** PSU


I am suffering major instability with this setup, and have traced it back to the RAM at this stage. The memory will pass Memtest at 1066 2 out of 3 times, and will boot, but crashes at least daily. the machine will post, but not boot at 1333 or 1600, and as has been noted previously, these sticks will handle 1.8v, but the mobo is limited to 1.65v (due, I believe to CPU based memory controller limitations).


Any suggestions ? (and PUHLEASE dont say "buy different RAM" lol )

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...