otal99 Posted January 20, 2010 Share Posted January 20, 2010 I recently purchased two sticks of CORSAIR 1GB 200-Pin DDR2 SO-DIMM DDR2 533 (PC2 4200) Laptop Memory Model VS1GSDS533D2 which is listed as compatible with my Gateway cx2620. Since installing it I am having issues on cold boots where it will take several minutes for the system to boot or it will freeze up and I have to restart it several times. Sometimes I even have to switch the ram slots. Once it boots it runs fine. There are no BSOD or anything. I tested both modules individually and they both seem to work. It is really annoying. It only happens if I turn off my computer and try to restart later like the next morning. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 23, 2010 Corsair Employees Share Posted January 23, 2010 Did you check for a BIOS or firmware update from the NB manufacturer? If not I would do that and then go to BIOS setup and load setup defaults and see if that will help solve the issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.