Jump to content
Corsair Community

Asus P5Q SE2 w/ TWINX4096-8500C7 G


bsodergran

Recommended Posts

Hi, I'm running the twinx4096-8500c7 on a Asus P5Q SE2.

I was hoping someone could supply me with a complete list, of the optimal timings setting for this MB.

I'm having some blue screens atm :(

I've put in the tested timings of 7-7-7-20 and rasied the v-core to 2,1v.

There are several sets of timing setting, that can altered, and it would be very much appreciated, if someone could help me out with these settings.

Tia, bsodergran

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest BIOS for your motherboard and then load optimized defaults and set the Memory Voltage to 2.1 volts and then set the timings to 7-7-7-20 (CAS-tRCD-tRP-tRAS) and then test the modules one at a time with http://www.memtest.org! Please allow memtest to run 2-3 passes on each module. If one module fails and the other passes, then we will need to replace the pair for you! However, if you get errors with both modules that may suggest some other problem and I would test them in another system or MB to be sure.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...