Westfront Posted January 15, 2010 Share Posted January 15, 2010 hallo zusammen, habe mir heute die o.g. ssd gekauft. ich habe sie zu erst im rechner an einem sata anschluss angeschlossen um ein update vor zu nehmen. allerdings wird sie weder beim booten noch unter win 7 erkannt. als ob nix da wäre..... hm, kann mir da jemand hilfe geben bzw hat tips? danke im voraus Link to comment Share on other sites More sharing options...
Elprincipal Posted January 15, 2010 Share Posted January 15, 2010 Sie sollte erst partitioniert werden bevor Sie ausählbar ist im Windows. Hier sollte ein 64 bzw 32k stripe gewählt werden und das NTFS format. Nach der Partitionierung muss die SSD natürlich noch entsprechend obigen Informationen formatiert werden. Zur formatierung kann bspw. Partion Manager genutzt werden oder ein ähnliches Programm. Wird die SSD denn im Bios erkannt ? Link to comment Share on other sites More sharing options...
Westfront Posted January 15, 2010 Author Share Posted January 15, 2010 danke für die antwort. nein, sie wird leider nicht im bios erkannt. habe auch die anderen sata anschlüsse probiert. es ist so, als würde sie gar nicht existieren..... :-( die sata konfiguaration steht bei mir im bios auf ide. Link to comment Share on other sites More sharing options...
Elprincipal Posted January 15, 2010 Share Posted January 15, 2010 Das neueste Bios mal aufgespielt? die SSD sollte jedenfalls erkannt werden vom Rampage II. Link to comment Share on other sites More sharing options...
Westfront Posted January 16, 2010 Author Share Posted January 16, 2010 bios 1704 ist drauf und somit aktuell. Link to comment Share on other sites More sharing options...
Elprincipal Posted January 17, 2010 Share Posted January 17, 2010 Ist die SSD an SATA Port 1 oder 2 Angeshclossen? wenn nicht mal an diese Ports anklemmen, wenn Sie dort auch nicht erkannt wird - würde ich zu einer RMA raten. Link to comment Share on other sites More sharing options...
Westfront Posted January 18, 2010 Author Share Posted January 18, 2010 alles sata anschlüsse probiert, leider kein erfolg.... rma? was meinst du damit? Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted January 18, 2010 Corsair Employees Share Posted January 18, 2010 Umtauschen, da defekt. Link to comment Share on other sites More sharing options...
Westfront Posted January 18, 2010 Author Share Posted January 18, 2010 ;): ach so.... sorry. ja, die karte ist derweil auf`m weg zum umtausch bzw zur prüfung. mal sehen was dabei raus kommt. Link to comment Share on other sites More sharing options...
Westfront Posted January 18, 2010 Author Share Posted January 18, 2010 gerade erhielt ich einen anruf vom händler und dieser meinte, dass die karte bei ihm im bios problemlos erkannt wird. da ich bei mir ALLE sata anschlüsse getestet habe (auch mal mit cmos) bin ich mehr als erstaunt. selbst unterschiedliche sata kabel habe ich verwendet um einen defekt aus zu schließen. gibt es irgendwelche spezifische bios einstellungen, die ich beachten muss? Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted January 18, 2010 Corsair Employees Share Posted January 18, 2010 Nein - generell kann die SSD wie eine stinknormale Festplatte verwendet werden... Probleme mit dem Stromkabel? Link to comment Share on other sites More sharing options...
Westfront Posted January 19, 2010 Author Share Posted January 19, 2010 jo, das stromkabel war`s... vielen dank für diesen einfachen aber bedeutenden hinweis. unglaublich, das stromkabel war tatsächlich defekt..... Link to comment Share on other sites More sharing options...
Elprincipal Posted January 19, 2010 Share Posted January 19, 2010 da haben wir mal wieder was gelernt :) ... nunja, im grunde ja gut das es ein recht simpler Fehler war. ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.