Micke60 Posted January 12, 2010 Share Posted January 12, 2010 Hello, Since a few days my computer undergoes immediate cuts at the end of some minutes. When Windows XP manages to load(charge), I fall on a blue screen with fault Page in not paged area then he(it) empties the memory. I wanted reinstalled Windows XP but after the load of the pilots(drivers) I fall again on a blue screen having deactivated the options in BIOS, I do not manage to resolve the problem. I thus used Utilmate Boot CD and I threw(launched) MEM86 + and my two pins of memory(report) Corsair VS1GB333 present both problems. I would thus like to change them if possible Cordially Micke Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted January 12, 2010 Corsair Employees Share Posted January 12, 2010 The tested settings would need to be manually set and the SPD information is the same for both parts so that may not solve the problem. I would suggest setting the tested settings manually and test them one at a time with http://www.memtest.org Cas 2-3-2-5 at 2.75 Volts and if you are using a Nforce MB with an Athalon XP CPU the settings should be Cas 2.5-3-2-5 at 2.75 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.