5jefro7 Posted January 12, 2010 Share Posted January 12, 2010 I'm no engineer (far from it, actually), but if I take, for instance, a pair of 50 CFM fans & set up the H50 in a push/pull configuration, I"m not necessarily going to get 100 of positive pressure, am I? I can see if the fans were located in different areas, but stacking them, even with the H50 radiator between them doesn't sound like it's going to do much more than 50 CFM (in my above example) any engineers that care to tackle this conundrum? J Link to comment Share on other sites More sharing options...
heliman41 Posted January 12, 2010 Share Posted January 12, 2010 Im no engineer but I did run my H50 with 1 fan checked temps then ran it in a push pull setup & the latter was a few degrees cooler. So regardless of the exact CFMs it does help to draw more thru the small fins of the radiator more efficiently with the extra power of another fan. In the end lower temps is what matters most to me, if it works do it is my feeling, had it made no diff id save the fan & the extra V to run it and would have stuck to just 1 fan. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.