avaksman Posted January 8, 2010 Share Posted January 8, 2010 I currently have the CMG4GX3M2A2000C8 running on a Asus Rampage II extreme with a i7-920. When i have everything on stock clock, and i only set my memory to 2000 MHz. It still wont allow me to boot the most i can get out of this memory is around 1600mhz. Can someone please suggest some settings? Voltages ,timings (which timings to change) and if there is anything else that I might have missed. Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 8, 2010 Share Posted January 8, 2010 Try using the XMP profile. Clear the BIOS first. Link to comment Share on other sites More sharing options...
avaksman Posted January 8, 2010 Author Share Posted January 8, 2010 That’s the first thing I tried, that is when I decided that the motherboard is not configuring some of the timings correctly and tried to do it manually still no luck. Link to comment Share on other sites More sharing options...
Yellowbeard Posted January 8, 2010 Share Posted January 8, 2010 That’s the first thing I tried, that is when I decided that the motherboard is not configuring some of the timings correctly and tried to do it manually still no luck. What specifically do you mean? Can you post CPU-Z screenshots of both your SPD and MEMORY tabs after setting the system to use the XMP profile? Link to comment Share on other sites More sharing options...
avaksman Posted January 9, 2010 Author Share Posted January 9, 2010 Once i installed CPU-Z i noticed my memmory was not conf correctly and was set in single channel once i put it into dual channel everything worked great ! Feel like a real newbi now LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.